Bluetooth UUID discovery

Question

Does anyone know how a bluetooth device could pick up the discoverable devices' device IDs in range?

I am ideally looking for the simplest solution that involves the smallest implimentation of the bluetooth protocols.

A starting point would be good, I just wish to create a device that can store all the device ids of nearby bluetooth devices with minimal power consumption, preferably just using radio frequencies and not SDP and whatever else.

If you can't help me with this, please can you help me find good reading material for low level bluetooth (step by step) communication. The reading online is so high level that I cant work out what is actually sent, when.

Answer 1

The Bluetooth specs from http://www.bluetooth.org are a good starting place for low-level information. You need an account to access the specs, but you can create one for free.

Basically what you need to do is to go into Inquiry mode periodically and grab the response packets as they arrive. The more time you spend in Inquiry mode, the more likely you will discover devices in range: discoverable devices enter the Inquiry Scan mode only relatively rarely; it takes some time (10.24s at least with older Bluetooth versions) to scan all the possible frequencies in the Inquiry/Inquiry Scan frequency hopping schemes. And even then you can have suboptimal radio conditions.

For implementation I suggest you at least start with existing Bluetooth libraries such as BlueZ and do not attempt to create your own from scratch.

Answer 2

Laalto nailed the answer from the Bluetooth spec/stack POV, but your question implies your looking for a stand-alone Bluetooth device - not just a laptop app scanning surrounding devices.

I can only speak for the BT chips that the company I work for manufactures (Cambridge Silicon Radio - CSR) but our chips can do that pretty much out of the box. Our chips have an on-board Virtual Machine sandbox that allows access to the firmware functions and Bluetooth stack of the chip. You can easily write a C code app to run in the virtual machine sandbox, on chip, that periodically scans for discoverable devices around, grab their ids and then download them when connected via USB or Serial, or maybe over BT when a device connects to the listener directly.

www.csr.com and www.csrsupport.com for chips, dev-kits, design references, etc.. etc...

You probably want a module with the extra HW (UARTs, USB etc...) as well as just the chip but you could implement this with something the size of a BlueTooth USB or probably smaller.

It would really help to know more about what your trying to achieve, why you want something that just scans the surrounding bluetooth devices and how big the device needs to be.

Sorry if this sounds like advertising. For balance: Broadcom make BT chips too!