Reading / Writing from a Unix Socket in Ruby

Question

I'm trying to connect, read and write from a UNIX socket in Ruby. It is a stats socket used by haproxy.

My code is the following:

require 'socket'
socket = UNIXSocket.new("/tmp/haproxy.stats.socket")

# First attempt: works

socket.puts("show stat")

while(line = socket.gets) do
  puts line
end

# Second attemp: fails

socket.puts("show stat")

while(line = socket.gets) do
  puts line
end

It succeeds the first time, but on the second attempt fails. I'm not sure why.

# pxname,svname,qcur,qmax,scur,smax,slim,stot,bin,bout,dreq,dresp,ereq,econ,eresp,wretr,wredis,status,weight,act,bck,chkfail,chkdown,lastchg,downtime,qlimit,pid,iid,sid,throttle,lbtot,tracked,type,rate,rate_lim,rate_max,check_status,check_code,check_duration,hrsp_1xx,hrsp_2xx,hrsp_3xx,hrsp_4xx,hrsp_5xx,hrsp_other,hanafail,req_rate,req_rate_max,req_tot,cli_abrt,srv_abrt,
stats,FRONTEND,,,0,0,2000,0,0,0,0,0,0,,,,,OPEN,,,,,,,,,1,1,0,,,,0,0,0,0,,,,0,0,0,0,0,0,,0,0,0,,,
stats,BACKEND,0,0,0,0,2000,0,0,0,0,0,,0,0,0,0,UP,0,0,0,,0,22,0,,1,1,0,,0,,1,0,,0,,,,0,0,0,0,0,0,,,,,0,0,
legacy_socket,FRONTEND,,,0,0,1000,0,0,0,0,0,0,,,,,OPEN,,,,,,,,,1,2,0,,,,0,0,0,0,,,,0,0,0,0,0,0,,0,0,0,,,
all,FRONTEND,,,0,0,10000,0,0,0,0,0,0,,,,,OPEN,,,,,,,,,1,3,0,,,,0,0,0,0,,,,0,0,0,0,0,0,,0,0,0,,,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,1,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,2,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,3,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,4,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,5,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,6,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,22,22,,1,4,7,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,21,21,,1,4,8,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,21,21,,1,4,9,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,socket,0,0,0,0,200,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,21,21,,1,4,10,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
socket_backend,BACKEND,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,DOWN,0,0,0,,1,21,21,,1,4,0,,0,,1,0,,0,,,,0,0,0,0,0,0,,,,,0,0,
api_backend,api,0,0,0,0,200,0,0,0,,0,,0,0,0,0,UP,1,1,0,0,0,22,0,,1,5,1,,0,,2,0,,0,L4OK,,0,0,0,0,0,0,0,0,,,,0,0,
api_backend,api,0,0,0,0,1,0,0,0,,0,,0,0,0,0,UP,1,1,0,0,0,22,0,,1,5,2,,0,,2,0,,0,L4OK,,0,0,0,0,0,0,0,0,,,,0,0,
api_backend,api,0,0,0,0,1,0,0,0,,0,,0,0,0,0,DOWN,1,1,0,0,1,21,21,,1,5,3,,0,,2,0,,0,L4CON,,0,0,0,0,0,0,0,0,,,,0,0,
api_backend,BACKEND,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,UP,2,2,0,,0,22,0,,1,5,0,,0,,1,0,,0,,,,0,0,0,0,0,0,,,,,0,0,
www_backend,ruby-www,0,0,0,0,10000,0,0,0,,0,,0,0,0,0,UP,1,1,0,0,0,22,0,,1,6,1,,0,,2,0,,0,L4OK,,0,0,0,0,0,0,0,0,,,,0,0,
www_backend,BACKEND,0,0,0,0,0,0,0,0,0,0,,0,0,0,0,UP,1,1,0,,0,22,0,,1,6,0,,0,,1,0,,0,,,,0,0,0,0,0,0,,,,,0,0,

/Users/Olly/Desktop/haproxy_stats.rb:14:in `write': Broken pipe (Errno::EPIPE)
    from /Users/Olly/Desktop/haproxy_stats.rb:14:in `puts'
    from /Users/Olly/Desktop/haproxy_stats.rb:14

What is the problem? Is there a good reference to using UNIX sockets and Ruby?

Answer 1

Looks like the connection has been closed after the first request. I don't think you are doing anything wrong. The HAProxy stats socket is probably designed so that it responds to a single command and then closes the connection.

I think you need to reconnect for each request.

If you look at this blog post which is about using HAProxy stats socket with socat then this makes sense because you pipe the show stat command into socat and socat reads from the socket until it closes.