I ran into this same issue a while back and found that if I created a simple abstract base class for data access that allowed me to inject a connection and transaction, I could unit test my sprocs to see if they did the work in SQL that I asked them to do and then rollback so none of the test data is left in the db.
This felt better than the usual "run a script to setup my test db, then after the tests run do a cleanup of the junk/test data". This also felt closer to unit testing because these tests could be run alone w/out having a great deal of "everything in the db needs to be 'just so' before I run these tests".
Here is a snippet of the abstract base class used for data access
Public MustInherit Class Repository(Of T As Class)
Implements IRepository(Of T)
Private mConnectionString As String = ConfigurationManager.ConnectionStrings("Northwind.ConnectionString").ConnectionString
Private mConnection As IDbConnection
Private mTransaction As IDbTransaction
Public Sub New()
mConnection = Nothing
mTransaction = Nothing
End Sub
Public Sub New(ByVal connection As IDbConnection, ByVal transaction As IDbTransaction)
mConnection = connection
mTransaction = transaction
End Sub
Public MustOverride Function BuildEntity(ByVal cmd As SqlCommand) As List(Of T)
Public Function ExecuteReader(ByVal Parameter As Parameter) As List(Of T) Implements IRepository(Of T).ExecuteReader
Dim entityList As List(Of T)
If Not mConnection Is Nothing Then
Using cmd As SqlCommand = mConnection.CreateCommand()
cmd.Transaction = mTransaction
cmd.CommandType = Parameter.Type
cmd.CommandText = Parameter.Text
If Not Parameter.Items Is Nothing Then
For Each param As SqlParameter In Parameter.Items
cmd.Parameters.Add(param)
Next
End If
entityList = BuildEntity(cmd)
If Not entityList Is Nothing Then
Return entityList
End If
End Using
Else
Using conn As SqlConnection = New SqlConnection(mConnectionString)
Using cmd As SqlCommand = conn.CreateCommand()
cmd.CommandType = Parameter.Type
cmd.CommandText = Parameter.Text
If Not Parameter.Items Is Nothing Then
For Each param As SqlParameter In Parameter.Items
cmd.Parameters.Add(param)
Next
End If
conn.Open()
entityList = BuildEntity(cmd)
If Not entityList Is Nothing Then
Return entityList
End If
End Using
End Using
End If
Return Nothing
End Function
End Class
next you will see a sample data access class using the above base to get a list of products
Public Class ProductRepository
Inherits Repository(Of Product)
Implements IProductRepository
Private mCache As IHttpCache
'This const is what you will use in your app
Public Sub New(ByVal cache As IHttpCache)
MyBase.New()
mCache = cache
End Sub
'This const is only used for testing so we can inject a connectin/transaction and have them roll'd back after the test
Public Sub New(ByVal cache As IHttpCache, ByVal connection As IDbConnection, ByVal transaction As IDbTransaction)
MyBase.New(connection, transaction)
mCache = cache
End Sub
Public Function GetProducts() As System.Collections.Generic.List(Of Product) Implements IProductRepository.GetProducts
Dim Parameter As New Parameter()
Parameter.Type = CommandType.StoredProcedure
Parameter.Text = "spGetProducts"
Dim productList As List(Of Product)
productList = MyBase.ExecuteReader(Parameter)
Return productList
End Function
'This function is used in each class that inherits from the base data access class so we can keep all the boring left-right mapping code in 1 place per object
Public Overrides Function BuildEntity(ByVal cmd As System.Data.SqlClient.SqlCommand) As System.Collections.Generic.List(Of Product)
Dim productList As New List(Of Product)
Using reader As SqlDataReader = cmd.ExecuteReader()
Dim product As Product
While reader.Read()
product = New Product()
product.ID = reader("ProductID")
product.SupplierID = reader("SupplierID")
product.CategoryID = reader("CategoryID")
product.ProductName = reader("ProductName")
product.QuantityPerUnit = reader("QuantityPerUnit")
product.UnitPrice = reader("UnitPrice")
product.UnitsInStock = reader("UnitsInStock")
product.UnitsOnOrder = reader("UnitsOnOrder")
product.ReorderLevel = reader("ReorderLevel")
productList.Add(product)
End While
If productList.Count > 0 Then
Return productList
End If
End Using
Return Nothing
End Function
End Class
And now in your unit test you can also inherit from a very simple base class that does your setup / rollback work - or keep this on a per unit test basis
below is the simple testing base class I used
Imports System.Configuration
Imports System.Data
Imports System.Data.SqlClient
Imports Microsoft.VisualStudio.TestTools.UnitTesting
Public MustInherit Class TransactionFixture
Protected mConnection As IDbConnection
Protected mTransaction As IDbTransaction
Private mConnectionString As String = ConfigurationManager.ConnectionStrings("Northwind.ConnectionString").ConnectionString
<TestInitialize()> _
Public Sub CreateConnectionAndBeginTran()
mConnection = New SqlConnection(mConnectionString)
mConnection.Open()
mTransaction = mConnection.BeginTransaction()
End Sub
<TestCleanup()> _
Public Sub RollbackTranAndCloseConnection()
mTransaction.Rollback()
mTransaction.Dispose()
mConnection.Close()
mConnection.Dispose()
End Sub
End Class
and finally - the below is a simple test using that test base class that shows how to test the entire CRUD cycle to make sure all the sprocs do their job and that your ado.net code does the left-right mapping correctly
I know this doesn't test the "spGetProducts" sproc used in the above data access sample, but you should see the power behind this approach to unit testing sprocs
Imports SampleApplication.Library
Imports System.Collections.Generic
Imports Microsoft.VisualStudio.TestTools.UnitTesting
<TestClass()> _
Public Class ProductRepositoryUnitTest
Inherits TransactionFixture
Private mRepository As ProductRepository
<TestMethod()> _
Public Sub Should-Insert-Update-And-Delete-Product()
mRepository = New ProductRepository(New HttpCache(), mConnection, mTransaction)
'** Create a test product to manipulate throughout **'
Dim Product As New Product()
Product.ProductName = "TestProduct"
Product.SupplierID = 1
Product.CategoryID = 2
Product.QuantityPerUnit = "10 boxes of stuff"
Product.UnitPrice = 14.95
Product.UnitsInStock = 22
Product.UnitsOnOrder = 19
Product.ReorderLevel = 12
'** Insert the new product object into SQL using your insert sproc **'
mRepository.InsertProduct(Product)
'** Select the product object that was just inserted and verify it does exist **'
'** Using your GetProductById sproc **'
Dim Product2 As Product = mRepository.GetProduct(Product.ID)
Assert.AreEqual("TestProduct", Product2.ProductName)
Assert.AreEqual(1, Product2.SupplierID)
Assert.AreEqual(2, Product2.CategoryID)
Assert.AreEqual("10 boxes of stuff", Product2.QuantityPerUnit)
Assert.AreEqual(14.95, Product2.UnitPrice)
Assert.AreEqual(22, Product2.UnitsInStock)
Assert.AreEqual(19, Product2.UnitsOnOrder)
Assert.AreEqual(12, Product2.ReorderLevel)
'** Update the product object **'
Product2.ProductName = "UpdatedTestProduct"
Product2.SupplierID = 2
Product2.CategoryID = 1
Product2.QuantityPerUnit = "a box of stuff"
Product2.UnitPrice = 16.95
Product2.UnitsInStock = 10
Product2.UnitsOnOrder = 20
Product2.ReorderLevel = 8
mRepository.UpdateProduct(Product2) '**using your update sproc
'** Select the product object that was just updated to verify it completed **'
Dim Product3 As Product = mRepository.GetProduct(Product2.ID)
Assert.AreEqual("UpdatedTestProduct", Product2.ProductName)
Assert.AreEqual(2, Product2.SupplierID)
Assert.AreEqual(1, Product2.CategoryID)
Assert.AreEqual("a box of stuff", Product2.QuantityPerUnit)
Assert.AreEqual(16.95, Product2.UnitPrice)
Assert.AreEqual(10, Product2.UnitsInStock)
Assert.AreEqual(20, Product2.UnitsOnOrder)
Assert.AreEqual(8, Product2.ReorderLevel)
'** Delete the product and verify it does not exist **'
mRepository.DeleteProduct(Product3.ID)
'** The above will use your delete product by id sproc **'
Dim Product4 As Product = mRepository.GetProduct(Product3.ID)
Assert.AreEqual(Nothing, Product4)
End Sub
End Class
I know this is a long example, but it helped to have a reusable class for the data access work, and yet another reusable class for my testing so I didn't have to do the setup/teardown work over and over again ;)