Can anyone suggest a a very simple way to use Net::SSH::Perl in Windows without all those cygwin hacks and all.
Whenever I am trying to install the modules it's taking me to some other dependent modules and the process seemed never ending..
Thanks beforehand
Here is a post on how to do it I found.
I recently had a project that required a script to perform an SSH session to a Cisco device and make some configuration changes. My favourite scripting language is, of course, perl.
I had previously written scripts using the Net::Telnet module that would Telnet to a device, detect various device prompts and send commands to the device to change its configuration. So, I thought that this was going to be a fairly straightforward case of just finding a suitable, similar module that uses SSH instead of Telnet.
The other thing that I need to mention is that I am generally constrained to using Win32 platforms (i.e. Windows 200, 2003, XP) due to the fact that most client sites that I work on these days do not use Unix(or Linux) ..which is a real pity in my opinion, but I don't set the corporate policies of my clients.
An initial glance of the available perl modules revealed a number of modules which seemed to be just what I needed :
Net::Appliance::Session Net::SSH::W32Perl Net::SSH
So, I told my boss, 'Yep, no problem' and set about pulling together a script to SSH in to a remote device and send it some commands to change its configuration.
After a day or so of trying various modules, I thought : 'Hmmm, maybe this isn't going to be as easy as I'd thought!'
Each of the modules I'd looked at seemed to have an issue when it came to using it in a Windows environment. To summarise, here are the issues I found with each module :
* Net::Appliance::Session : has a dependency on IO::Pty, which won't ever run on Windows
* Net::SSH::W32Perl : ``getpwuid function is unimplemented'' message`` when building from scratch. Older ppd's found at http://www.soulcage.net/ppds.58 just don't seem to work....even when installed in to the Activestate perl distribution
* Net::SSH : Unix only
So, at this point, I was beginning to think that maybe this just wasn't going to work at all on Windows....
Then, I remembered seeing a posting on perl mongers where someone has mentioned that they had used perl in cygwin to run one of the Net::* modules.
So, although the thought of having to download and install cygwin didn't initially seem too appealing, I thought I'd give it a go as I had no where else to go.
Cygwin
Cygwin is...well, let me quote directly from the cygwin web site :
``Cygwin is a Linux-like environment for Windows. It consists of two parts:
A DLL (cygwin1.dll) which acts as a Linux API emulation layer providing substantial Linux API functionality. A collection of tools which provide Linux look and feel.
The Cygwin DLL currently works with all recent, commercially released x86 32 bit and 64 bit versions of Windows, with the exception of Windows CE.``
So, it allows you to run in a Linux-type environment...sounds far more promising for the various Net::* modules that I had been looking at.
Also, once the basic cygwin core is installed, it allows you to download and install a whole host of other goodies, including perl !
So, I set about installing cygwin by downloading the 'setup.exe' file from the cygwin home page and running it on my PC.
Cygwin provides a failrly intuitive GUI to let you select a mirror to download files from, and which packages you would like to download.
Here are the packages that I installed beyond just the basic core cygwin packages that are installed for you :
gcc-core gnupg make ncftpget openSSH perl perl-ExtUtils wget zip
You can install others (in addition) if you like, but these did the job for me.
Perl
Once I had cygwin installed (including the perl distribution that I included), I was all set to add in the modules that I wanted to try to use (e.g. Net::SSH::Appliance).
If you are familiar with perl on Unix systems, then you will probably be very familiar with the CPAN shell to add modules into your perl distribution. Under cygwin, the process is exactly the same.
If you are used to using the Activestate version of perl, you are probably used to using the Activestate PPM manager to add new modules to perl. Well, the bad news is that under cygwin, you don't have a PPM manager, and you have to use the CPAN shell, which is a little bit trickier to use if you aren't used to it. The good news however, is that you will have access to far more perl modules !
When you installed cygwin, it will have put an icon somewhere (either on your desktop, quicklauch bar or start menu) so that you can launch the cygwin shell (it looks something like this :
If you click the shell icon, you will get a nice cygwin shell open up where you can type in various commands. You can think of it as a Unix shell to all intents and purposes.
To load in the perl modules you'll need, you need to enter 'cpan' at the command prompt. This will allow you to load new modules in to your perl distribution.
Now, the first time you go in to the CPAN shell, it will aks you lots of rather awkward questions about where various utilities are and which mirror you would like to use. In the main, if you have installed the modules that I recommended for cygwin, you can accept the defaults. (The mirror you will have to figure out for yourself - it depends where in the world you are).
The only setting I would recommend you change from the default is the question about whether you should be 'asked or follow' for pre-requisite modules - I would go for 'follow' to save a lot of hassle.
Once you have your cpan shell open (you can tell, because you now have a 'cpan>' prompt), you need to enter the following commands to load in some perl modules that you will need :
install LWP (accept all defaults to any questions asked) install Net::Appliance::Session
When you enter these commands, you will see lots of things flying up the screen as the modules are installed for you.
Running Scripts
Well, at this point, we have taken a rather whirlwind tour through getting cygwin and perl instaled on your platform, but you should now be in a position to run some perl scripts.
We installed the Net::Appliance::Session module in to your perl distribution, so that we can run perl scripts that will use it to give us either Telnet or SSH sessions to a target device.
As we are running under the cygwin environment, we can now use this module on a Windows platform - something we couldn't do by just installing Activestate perl, or even by compiling our own version of perl under Windows. So, now, we CAN run perl scripts that will allow us to perform SSH sessions to network devices that only support SSH.
You may be wondering : ``does that mean that I have to run my perl scripts from the cygwin shell every time I need to run them ?''. Well, the good news is that no, you don't..! As long as you call the cygwin perl executable to run your script, it will run fine from a DOS prompt (or system scheduler !). So, this would work fine :
c:\ c:\cygwin\bin\perl.exe myscript.pl
Anyhow, I guess that's enough to let you know how I cracked my particular issue. I hope to cover all of this in a little more detail in future aritcles, as well as providing more informatipon about how to use the incredibly useful Net::Appliance::Session module to create some useful scripts to control and configure your network devices.