What's the CFString Equiv of NSString's UTF8String?

Question

I'm stuck on stoopid today as I can't convert a simple piece of ObjC code to its Cpp equivalent. I have this:

  const UInt8 *myBuffer = [(NSString*)aRequest UTF8String];

And I'm trying to replace it with this:

  const UInt8 *myBuffer = (const UInt8 *)CFStringGetCStringPtr(aRequest, kCFStringEncodingUTF8);

This is all in a tight unit test that writes an example HTTP request over a socket with CFNetwork APIs. I have working ObjC code that I'm trying to port to C++. I'm gradually replacing NS API calls with their toll free bridged equivalents. Everything has been one for one so far until this last line. This is like the last piece that needs completed.

Answer 1

If it's destined for a socket, perhaps CFStringGetBytes() would be your best choice?

Also note that the documentation for CFStringGetCStringPtr() says:

This function either returns the requested pointer immediately, with no memory allocations and no copying, in constant time, or returns NULL. If the latter is the result, call an alternative function such as the CFStringGetCString function to extract the characters.

Answer 2

From the documentation:

Whether or not this function returns a valid pointer or NULL depends on many factors, all of which depend on how the string was created and its properties. In addition, the function result might change between different releases and on different platforms. So do not count on receiving a non-NULL result from this function under any circumstances.

You should use CFStringGetCString if CFStringGetCStringPtr returns NULL.

Answer 3

This is one of those things where Cocoa does all the messy stuff behind the scenes, and you never really appreciate just how complicated things can be until you have to roll up your sleeves and do it yourself.

The simple answer for why it's not 'simple' is because NSString (and CFString) deal with all the complicated details of dealing with multiple character sets, Unicode, etc, etc, while presenting a simple, uniform API for manipulating strings. It's object oriented at its best- the details of 'how' (NS|CF)String deals with strings that have different string encodings (UTF8, MacRoman, UTF16, ISO 2022 Japanese, etc) is a private implementation detail. It all 'just works'.

It helps to understand how [@"..." UTF8String] works. This is a private implementation detail, so this isn't gospel, but based on observed behavior. When you send a string a UTF8String message, the string does something approximating (not actually tested, so consider it pseudo-code, and there's actually simpler ways to do the exact same thing, so this is overly verbose):

- (const char *)UTF8String
{
  NSUInteger utf8Length = [self lengthOfBytesUsingEncoding:NSUTF8StringEncoding];
  NSMutableData *utf8Data = [NSMutableData dataWithLength:utf8Length + 1UL];
  char *utf8Bytes = [utf8Data mutableBytes];
  [self     getBytes:utf8Bytes
           maxLength:utf8Length
          usedLength:NULL
            encoding:NSUTF8StringEncoding
             options:0UL
               range:NSMakeRange(0UL, [self length])
      remainingRange:NULL];
  return(utf8Bytes);
}

You don't have to worry about the memory management issues of dealing with the buffer that -UTF8String returns because the NSMutableData is autoreleased.

A string object is free to keep the contents of the string in whatever form it wants, so there's no guarantee that its internal representation is the one that would be most convenient for your needs (in this case, UTF8). If you're using just plain C, you're going to have to deal with managing some memory to hold any string conversions that might be required. What was once a simple -UTF8String method call is now much, much more complicated.

Most of NSString is actually implemented in/with CoreFoundation / CFString, so there's obviously a path from a CFStringRef -> -UTF8String. It's just not as neat and simple as NSString's -UTF8String. Most of the complication is with memory management. Here's how I've tackled it in the past:

void someFunction(void) {
  CFStringRef cfString; // Assumes 'cfString' points to a (NS|CF)String.

  const char *useUTF8StringPtr = NULL;
  char *freeUTF8StringPtr = NULL;

  CFIndex stringLength = CFStringGetLength(cfString), usedBytes = 0L;

  if((useUTF8StringPtr = CFStringGetCStringPtr(cfString, kCFStringEncodingUTF8)) == NULL) {
    if((freeUTF8StringPtr = malloc(stringLength + 1L)) != NULL) {
      CFStringGetBytes(cfString, CFRangeMake(0L, stringLength), kCFStringEncodingUTF8, '?', false, freeUTF8StringPtr, stringLength, &usedBytes);
      freeUTF8StringPtr[usedBytes] = 0;
      useUTF8StringPtr = (const char *)freeUTF8StringPtr;
    }
  }

  long utf8Length = (long)((freeUTF8StringPtr != NULL) ? usedBytes : stringLength);

  if(useUTF8StringPtr != NULL) {
    // useUTF8StringPtr points to a NULL terminated UTF8 encoded string.
    // utf8Length contains the length of the UTF8 string.

    // ... do something with useUTF8StringPtr ...
  }

  if(freeUTF8StringPtr != NULL) { free(freeUTF8StringPtr); freeUTF8StringPtr = NULL; }
}

NOTE: I haven't tested this code, but it is modified from working code. So, aside from obvious errors, I believe it should work.

The above tries to get the pointer to the buffer that CFString uses to store the contents of the string. If CFString happens to have the string contents encoded in UTF8 (or a suitably compatible encoding, such as ASCII), then it's likely CFStringGetCStringPtr() will return non-NULL. This is obviously the best, and fastest, case. If it can't get that pointer for some reason, say if CFString has its contents encoded in UTF16, then it allocates a buffer with malloc() that is large enough to contain the entire string when its is transcoded to UTF8. Then, at the end of the function, it checks to see if memory was allocated and free()'s it if necessary.

And now for a few tips and tricks... CFString 'tends to' (and this is a private implementation detail, so it can and does change between releases) keep 'simple' strings encoded as MacRoman, which is an 8-bit wide encoding. MacRoman, like UTF8, is a superset of ASCII, such that all characters < 128 are equivalent to their ASCII counterparts (or, in other words, any character < 128 is ASCII). In MacRoman, characters >= 128 are 'special' characters. They all have Unicode equivalents, and tend to be things like extra currency symbols and 'extended western' characters. See Wikipedia - MacRoman for more info. But just because a CFString says it's MacRoman (CFString encoding value of kCFStringEncodingMacRoman, NSString encoding value of NSMacOSRomanStringEncoding) doesn't mean that it has characters >= 128 in it. If a kCFStringEncodingMacRoman encoded string returned by CFStringGetCStringPtr() is composed entirely of characters < 128, then it is exactly equivalent to its ASCII (kCFStringEncodingASCII) encoded representation, which is also exactly equivalent to the strings UTF8 (kCFStringEncodingUTF8 ) encoded representation.

Depending on your requirements, you may be able to 'get by' using kCFStringEncodingMacRoman instead of kCFStringEncodingUTF8 when calling CFStringGetCStringPtr(). Things 'may' (probably) be faster if you require strict UTF8 encoding for your strings but use kCFStringEncodingMacRoman, then check to make sure the string returned by CFStringGetCStringPtr(string, kCFStringEncodingMacRoman) only contains characters that are < 128. If there are characters >= 128 in the string, then go the slow route by malloc()ing a buffer to hold the converted results. Example:

CFIndex stringLength = CFStringGetLength(cfString), usedBytes = 0L;

useUTF8StringPtr = CFStringGetCStringPtr(cfString, kCFStringEncodingUTF8);

for(CFIndex idx = 0L; (useUTF8String != NULL) && (useUTF8String[idx] != 0); idx++) {
  if(useUTF8String[idx] >= 128) { useUTF8String = NULL; }
}

if((useUTF8String == NULL) && ((freeUTF8StringPtr = malloc(stringLength + 1L)) != NULL)) {
  CFStringGetBytes(cfString, CFRangeMake(0L, stringLength), kCFStringEncodingUTF8, '?', false, freeUTF8StringPtr, stringLength, &usedBytes);
  freeUTF8StringPtr[usedBytes] = 0;
  useUTF8StringPtr = (const char *)freeUTF8StringPtr;
}

Like I said, you don't really appreciate just how much work Cocoa does for you automatically until you have to do it all yourself. :)

Answer 4

Here's a way to printf a CFStringRef which implies we get a '\0'-terminated string from a CFStringRef:

// from: http://lists.apple.com/archives/carbon-development/2001/Aug/msg01367.html
// by Ali Ozer
// gcc -Wall -O3 -x objective-c -fobjc-exceptions -framework Foundation test.c

#import <stdio.h>
#import <Foundation/Foundation.h>

/*
This function will print the provided arguments (printf style varargs) out to the console.
Note that the CFString formatting function accepts "%@" as a way to display CF types.
For types other than CFString and CFNumber, the result of %@ is mostly for debugging
and can differ between releases and different platforms. Cocoa apps (or any app which
links with the Foundation framework) can use NSLog() to get this functionality.
*/

void show(CFStringRef formatString, ...) {
   CFStringRef resultString;
   CFDataRef data;
   va_list argList;
   va_start(argList, formatString);
   resultString = CFStringCreateWithFormatAndArguments(NULL, NULL, formatString, argList);
   va_end(argList);
   data = CFStringCreateExternalRepresentation(NULL, resultString, 
   CFStringGetSystemEncoding(), '?');
   if (data != NULL) {
      printf ("%.*s\n", (int)CFDataGetLength(data), CFDataGetBytePtr(data));
      CFRelease(data);
   }
   CFRelease(resultString);
}

int main(void)
{

   // To use:
   int age = 25;
   CFStringRef name = CFSTR("myname");

   show(CFSTR("Name is %@, age is %d"), name, age);

   return 0;
}